As for automobile film, there is a saying in the industry - "three film, seven film", which refers to the importance of construction in automobile film. After all, if the construction is not in place, no matter how good the membrane is, it will not stick its "charm", and it is likely to bring various "sequelae", such as blistering, water ingress, scratching glass, etc.
Therefore, we must find a service brand for car film, such as Tieke car film. In order to make each film into an impeccable work of art, a complete film sticking standard has been carefully established, and the film sticking technology from tools to technicians is strictly controlled.
Because in the eyes of every film technician, every film is an artistic creation. The car with the film carefully pasted is their carefully crafted work. They hope to use a heart to create treasures in exchange for the customer's cherish and care. Every film pasted can be carefully maintained. If you don't know how to maintain the film, please continue to look down.
1、 Within one week after the film is pasted, try to park the car in a sunny place to ensure that the water vapor in the film is fully evaporated.
2、 Try not to wash the car within three days after pasting the film, so as to avoid falling off of the film due to wet water; If the car is dirty when applying the film, wash the car first and then apply the film.
3、 Within seven days after the film is pasted, the rear window defogging line shall not be opened as far as possible, so as to avoid the adverse impact of wet water on the defogging line. Auto paster
4、 Misty water vapor will be found in the film for a period of time, which is a normal phenomenon during the drying process of the film, and will slowly disappear after a period of time.
5、 Try not to lift the window within 5-7 days after applying the film, especially for new vehicles that have just finished applying the film, so as to avoid warping or displacement of the film edge during the opening and closing process of the window.
6、 After the vehicle is coated with the film, try not to paste or hang things directly on the window, so as not to open the gap of the film when pulling up the suction cup and paste, which will affect the film effect.
7、 If the film surface is stained, do not wipe the film surface with chemical solvent.
Use wet towel, paper towel or cotton cloth to clean with detergent, or use rubber wiper to clean.