常见问题
当前位置: 首页- 新闻中心 > 常见问题 >

碰到隐形车衣翘边了怎么办

发布时间:2022-07-15 作者:济南贴客量子膜 文章来源:http://www.tiekemoshe.com/ 浏览量:

隐形车衣的效果大家都是知道,主要是保护车的原车漆,这一点就让非常多的车主们选择隐形车衣,但是有的车主给小编反馈,自己去店里面贴了隐形车衣,没过多久现在居然就翘边了,这是什么原因造成的呢?今天小编就来给大家分析一下!
Everyone knows the effect of invisible car clothes, mainly to protect the original car paint, which makes a lot of car owners choose invisible car clothes, but some car owners give feedback to Yantai invisible car clothes editor. They went to the store and pasted the invisible car clothes. It didn't take long for the edge to curl now. What's the reason? Today, Xiaobian will analyze it for you!
现在好多爱车人士都喜欢给汽车贴车衣,原因是由于其的性能,隐形车衣不仅可以保护漆面免受破坏,而且他们可以改善汽车的亮度。它已成为许多车主的选择。
Now many car lovers like to stick car clothes on their cars. The reason is that because of its performance, invisible car clothes can not only protect the paint from damage, but also improve the brightness of the car. It has become the choice of many car owners.
但是,目前有许多不同品牌的隐形车衣,质量水平参差不齐,如果选择不当。可能会有许多问题,例如泛黄,脱胶和翘边。
However, at present, there are many invisible car clothes of different brands, and the quality level is uneven. If you choose improperly. There may be many problems, such as yellowing, degumming and warping.
1,在两种情况下可以修复翘边的情况,一种是在施工完成后,水分会残留在车衣内,这会大大降低胶层的附着力。另一种是在贴完车衣后,没过几天之后就去洗车。
1. The edge warping can be repaired in two cases. One is that after the construction is completed, moisture will remain in the car clothes, which will greatly reduce the adhesion of the adhesive layer. The other is to wash the car after pasting the car clothes a few days later.
车衣边缘被高压水枪冲击,如果出现这两种情况,可以去门店进行修复,需要重新贴上隐形车衣。贴好隐形车衣以后,你需要注意,不能上高速公路行驶和洗车。
The edge of the car clothing is impacted by a high-pressure water gun. If these two situations occur, you can go to the store to repair it, and you need to re stick the invisible car clothing. After pasting the invisible car clothes, you need to pay attention not to drive on the highway and wash the car.
如果一定要洗车,也要告诉洗车师傅注意,因为对于洗车时车衣是不能用这种高压水枪冲洗边缘的。
If you have to wash the car, you should also tell the car washer to pay attention, because you can't use this high-pressure water gun to wash the edge of the car clothes when washing the car.
2,有些翘边情况是无法修复的,例如,如果使用劣质廉价的胶水,掉胶翘边的情况非常多,甚至某些隐形车衣不仅仅用的是廉价胶水,而且连车衣都是劣质产品。
2. Some edge warps cannot be repaired. For example, if inferior and cheap glue is used, there are many cases of glue falling and edge warping. Even some invisible car clothes not only use cheap glue, but also car clothes are inferior products.
短时间就会出现车衣回弹收缩的情况,这种情况就会导致翘边。这两种情况是产品质量问题,而不是外部环境原因,无法补救。发生这种情况时,您需要寻找售后,但一般而言,劣质产品的售后可能是没有的的。
The clothes will rebound and shrink in a short time, which will lead to edge warping. These two situations are product quality problems, not external environmental reasons, and cannot be remedied. When this happens, you need to look for after-sales service, but generally speaking, there may be no after-sales service for inferior products.
这时,只能将车衣直接撕掉,否则保留车衣将是“祸害”,不仅不能有效保护车漆,甚至会损坏车漆。
At this time, you can only tear off the car clothes directly, otherwise keeping the car clothes will be a "disaster", which will not only not effectively protect the car paint, but even damage the car paint.
以上就是为大家介绍的有关济南隐形车衣的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以专业的态度,为您提供服务.http://www.tiekemoshe.com/
The above is a detailed introduction about Jinan invisible car clothes. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.tiekemoshe.com/
相关产品 MORE+
首页首页 产品产品 电话电话 置顶置顶