What should I do if there are bubbles in the car film? If there is air in the bubble, it's a good solution, because the air will not affect the adhesion of the film. The solution is to find a thin object like an embroidery needle to puncture the bubble, and then squeeze the air out of the bubble with a flat plate.
But if there is dust and sand inside the bubble, it will be more troublesome. The solution is to take the quality assurance card to the place where the film is applied and find a professional to deal with it. If the personnel can't solve it, they can only change a set of film.
There are two possible reasons for bubbles in the film
1. The quality of automobile film itself. When you buy car film, you should choose products with good quality. Degumming, blistering and fading often occur in products with poor quality. Therefore, in the car film can not be cheap and choose three no products, try to choose brand car film, only the quality pass, in order to reduce the possibility of failure after the car film.
2. Service quality of automobile film construction. Dust removal and cleaning must be done before film application. If there is dust on the body or film, bubbles will appear after the film is applied.
The above is the reason why the car film blisters. I hope it can help you http://www.tiekemoshe.com